Operating on Australia’s Gold Coast from The Boatworks Coomera, Runaway Bay Marina and Boat Masters Hope Island, Pro-Care Marine Antifouling provides top quality workmanship and products on every job.
Pro-Care Marine Antifouling Gold Coast provides a thorough and professional, yet cost effective boat antifouling service to ensure your vessel performs to its maximum capacity.
Our re-antifouling quotes are inclusive of hull waterline staining acid wash, hull, skin fittings/strainers & running gear preparation (further water blasting, scraping, wet sanding, spot priming any bare patches, stern drive legs we raise, lower and turn side to side multiple times during the cleaning, preparation and antifouling process), application of 2 coats of high-performance antifouling coatings, materials, labour and GST.
Lifting, hardstand or shed hire, water blast and environmental levy is not included in our rates, we ask owners to book and pay this directly with the chosen marina.
We carry out a general check of everything below waterline, if we find anything such as chips or gauges, blisters, osmosis, broken transducers etc. we will let you know and provide any quotes.
Eroded Anode replacements as required are additional and we will price separately.
Our general recommendation for re-antifouling, anodes checked/replaced and a general check of everything below waterline is every 12-18 months, and aluminium hull vessels every 12-15 months
We also provide first time (clean skin) antifouling procedures which include setting antifoul line, sanding, cleaning, 2 coats of epoxy primers.
Hull, & (whole exteriors of smaller vessels) buff polishing and waxing is also available.
PropspeedTM
Propspeed is a catalysed etch primer + silicone based top coat antifouling system designed for use on metal underwater running gear.
Propspeed has very low friction with water, its finish is similar to that of glass.
Benefits of having Propspeed applied are:
Making Prospeed a viable upgrade for your boat's performance.
Our process:
Strip old propspeed or antifoul back to bare metal, clean with Propclean, condition metal with Propprep, apply 2 coats of Propspeed 2 pack gold coloured yellow/gold etching primer followed by Propspeed clear coat in the manufactures specified time frame to achieve a strong chemical bond.
To discuss your wishes and obtain a quote: